There has been an error.
We apologize for any inconvenience, please return to the home page or use the search form below.
Search for: "投注網-【✔️推薦DD96·CC✔️】-滙豐銀行國際轉帳時間-投注網2q7rf-【✔️推薦DD96·CC✔️】-滙豐銀行國際轉帳時間sd25-投注網r1kgc-滙豐銀行國際轉帳時間tzka"
Additional Info
Musclechuck Size: 1/2 in
Setting Ring Sizes: 1/8 in, 1/4 in, 3/8 in, 1/2 in, 6 mm, 8 mm, 10 mm (custom sizes available upon request)
Collet Reducer Sizes: 1/8 in, 3/16 in, 1/4 in, 5/16 in, 3/8 in, 6 mm, 8 mm, 10 mm (custom sizes available upon request)
Cap Screw: 5 mm Grade 8
Warranty: 30-day money-back guarantee, including shipping & handling
Nut Torque Max: 12 ft-lbs
Cap Screw Torque Max: 125 in-lbs
Slip Torque: 435 in-lbs (approx.)
Mechanical Advantage: 3.5/1 (approx.)
Certifications: (1) all materials and processes are certified to aircraft standards and are available upon request; and (2) each Musclechuck™ assembly is measured and tested for compliance. Specials or Modifications: If your router model is not listed on our site, please contact us for modifications/custom orders.
Disclaimer: Power tools and their accessories, such as the “Musclechuck™” assembly, should only be used for their intended purpose by users experienced in their operation. Careless handling or misuse may result in serious injury or death. Failure to follow the enclosed directions is a misuse of the “Musclechuck™” assembly. The user must always make sure that the cutter is secure in the chuck, especially when a reduction collet is being used BEFORE turning on the router.
Testimonial
“The Musclechuck™ assembly makes fitting and removing cutters a pleasure with all forms of routing. You only need a batch of work involving frequent cutter changes to appreciate its benefits.”
- Ron Fox in The Woodworker Magazine
I have used and abused the Musclechuck™ for the better part of 12 months now and used them in all the routers they make one for. It is sorely missed when I have to use a router without a Musclechuck™. If one were to be lost or stolen it would promptly be replaced. I do keep extras in case one fails which has not happened in the 12 months I have tested the chuck.
- This Old Workshop
(The #1 Unique Tool Testing Site On The Web)
I have been making and designing furniture for 40 years. Shapers and routers have been part of that process but their use frequently led to less than perfect results. Chatter marks and tear out from the vibration of the motors was something that I thought had to be accepted until I had the opportunity to install, tune and use the Muscelchuck. The ease of installation was only exceeded by the product that it produced. It's operation has significantly improved the use of the router in production and eliminated time consuming touch-ups. It has been a valuable addition to my shop.
Gorman Getty
Garrett/Getty Fine Woodworking